|
| TM11-5820-890-10-8
ACTIONS
CHECKS
7.
Perform Hot Start Net
Do COMSEC/FH data load
(1)
YES: Continue
Entry***
in RT?
NO: Go to TS Guide 1
Is traffic now heard?
YES: Problem is solved
(2)
NO: Continue****
Can NCS be contacted?
YES: Problem is solved
(3)
NO: See Unit Maintenance
*
ANCD time may not be valid if it has been more than 24 hours since lCOM fill of radio.
For vehicular radios, skip this step and continue with Step 7. Battery power can be
l*
checked by placing RF PWR in HI and pressing PTT. Signal display of 2 of less indicates your
battery is weak.
***
Operator has option of using CUE and ERF method of late net entry in lieu of the Hot
Start procedure if desired.
****
The possibility that there is no traffic on the net must be considered, so try to contact
your NCS to check serviceability of your radio.
8-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |