|
| TM
11-5820-890-10-8
NOTE
DATA RXMT: All data rates except PCKT may be retrans with the following provisions.
1. SDM data, TF and AD1 : No change to normal retrans procedures. Radios do not have to be set
in Data mode (data off). Mixed radios at RXMT site or outstations is permitted.
2. EDM DATA: Radios at the RXMT site have to be set to the same EDM data rates as outstations.
Only SIP radios can be used at the RXMT site and outstations.
Send an ERF as Part of RXMT Operation
SPECIAL TASK 7:
This task is required only as a part of RXMT operations. In some
situations, it may be necessary for the RXMT operator to send an ERF to
the distant station before retransmission can be started. Any operator
held responsible for performing Special Task 6 should also be trained in
this task.
Change Net ID
SPECIAL TASK 8:
When contact with a non-loadset (not loaded in radio Channel 1
through 6) station is desired, the operator needs to be able to change to
the net ID of the desired station.
Use SIP RT as an RCU
SPECIAL TASK 9:
Allows the operator to use the SIP RT as either a Manpack RCU or
remoted radio.
Send Data Via RS-232 Mode
SPECIAL TASK 10:
Allows the operator to use any one of four enhanced data rates to
transmit and receive data messages using RS-232 mode.
5-44
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |