 |
|||
|
|
|||
|
Page Title:
Table 5-1. Test Equipment Required (Sheet 2 of 3) |
|
||
| ||||||||||
|
|  TO 31R2-2GRC171-2
TM 11-5820-815-14
NAVELEX 0967-LP-544-5010
Table 5-1. Test Equipment Required (Sheet 2 of 3)
TEST EQUIPMENT
TEST CHARACTERISTICS
HP 200CD Audio Oscillator
Frequency: 16 Hz to 25 kHz.
Output level: 0 to 4.75 V rms into 600-ohm load.
Distortion: Less than 0.50%.
HP 333A Distortion Analyzer
Distortion frequency range: 5 Hz to 600 kHz.
Distortion level: 0 to 100%.
Voltmeter (audio level): 0 to 9.0 V rms.
Bird Model 43 Wattmeter with Bird 50D
Frequency range: 225 to 400 MHz.
Plug-in Element
Power: 50 watts.
Input/output impedance: 50 ohms, resistive.
General Radio 874-GAL Variable Attenuator
Power: 0 to 30 W.
Attenuation: 0 to 60 dB.
Frequency: 225 to 400 MHz.
Input/output impedance: 50 ohms.
Bird 8130 RF Load
Power: 50 W.
Frequency range: 225 to 400 MHz.
Impedance: 50 ohms.
Simpson 260 VOM
0 to 30 V dc, 10%.
Measurements Corporation Type 80ZH3
Attenuation: 6 dB.
Attenuator
Input/output impedance: 50 ohms.
Data Pulse Model 101 Pulse Generator
Pulse width: 2 to 12 ps.
Pulse repetition rate: 300 to 1500 prf.
Rise and fall time: Less than 1/10 s.
Amplitude: 5 V into 50 ohms.
Weinschel 1506N Power Divider
Two input ports and one output port.
Frequency range: 225 to 400 MHz.
Modulation: 2- to 12-ps pulse at 300 to 1500 prf.
Input power: 500 mW average.
Insertion loss: 6 dB.
5-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals