Repair and Replacement of Connectors

TM 11-5820-695-35

defective connector contacts (crimp or solder type

(4) Remove suspect defective component

removable contacts). Connectors on assemblies to be

from chassis frame using care not to damage rigid

repaired at depot level are identified in b (Transmitter,

coaxial cables.

Radio T-1054(P)/GRC-144(V), and T-1054(P)A/GRC-

144) c (Receiver, Radio R-1467(P)/GRC-144(V)and R-

b. Replacement.

Replacement consists

1467/GRC-144) and d (Converter-Multiplier CV-

following the reverse order of removal instructions.

3633/GRC144(V) below. Also listed are applicable tools

and a reference to the paragraphs which detail the

4-12. Repair and Replacement of Connectors

required repair procedures.

a. General.

Connector repair consists of the

replacement of the defective connector (solder type

nonremovable contacts) or the replacement of the

Change 6

4-6.2