In the synchronous mode-continued

TM 11-5820-695-35

represented by the plus voltage level for only one-half

pcm code. The pcm code bits are either logic one,

represented by a positive voltage level, or logic zero,

the baud time and the signal level is zero volts for the

other half of baud time, the signal is designated one half

represented by a zero voltage level. The time allotted

for each bit is referred to as a baud. When a logic one

baud. In Radio Set AN/GRC-144(V), one baud is 434

nanoseconds corresponding to a frequency of 2304 kHz.

bit is represented by the plus voltage level for the entire

In the cable-to-radio direction, the signal received from

baud time, the signal is designated full baud. If it is

Change 6 2-8