LIGHT PANEL REPLACEMENT.

TM 11-5820-670-30

2-76. LIGHT PANEL REPLACEMENT.

MATERIALS/PARTS: Panel, light (P/N SMD620232)

PRELIMINARY PROCEDURE: Remove dial mask (para 2-75).

REMOVAL

1. Remove four roll pins (1) from four frequency selector switch shafts (2) as shown in detail A.

2. Remove four shaft dials (3).

3. Using screwdriver, remove five panel mounting nuts (4) and remove light panel (5).

INSTALLATION

1. Position light panel (5) on control panel (6) and install five panel mounting nuts (4) and,

using screwdriver, tighten nuts (4).

2. Install four shaft dials (3).

3. Aline shaft dial notch (7) with flat (8) on frequency selector switch shafts (2) as shown in

detail B.

4. Install four roll pins (1) in four frequency selector switch shafts (2).

FOLLOW-ON MAINTENANCE: Install dial mask (para 2-75).

2-225