INSTALLATION - TM-11-5820-670-300293

TM 11-5820-670-30

2-60. TRANSISTOR Q9601 REPLACEMENT. (CONT)

NOTE

Due to inaccessible location of screw, it is advised that it not be removed.

4. Remove transistor (12) and insulator (13).

INSTALLATION

1. Coat both sides of insulator (13) with heat sink compound.

NOTE

Be careful not to push screw from hole.

2. While holding screw (11) against mount, position insulator (13) and transistor (12) on mount

alining pins on transistor with holes in mount.

3. Install wire lug (10) and nut (9).

4. Using socket wrench and screwdriver, tighten nut (9) and screw (11).

5. Install screw (8), wire lug (7), bushing (6), and nut (5).

6. Using socket wrench and screwdriver, tighten nut (5) and screw (8).

7. Using soldering iron, solder jumper wire (3) to pin (4) and yellow wire (1) to pin (2).

FOLLOW-ON MAINTENANCE: Install A8700 assembly (para 2-45).

2-201