REMOVAL-continued - TM-11-5820-670-300253

TM 11-5820-670-30

2-43. A3000 MODULES AND ASSEMBLY REPLACEMENT. (CONT)

NOTE

Modules A3100 through A3700 are secured with captive screws. Steps 3, 4, and 5 are

typical for all modules.

3. Disconnect black wire (P3301) (3) from A3300 and red wire (P3701) from A3700 (4).

4. Using screwdriver, loosen captive screws (5).

CAUTION

To prevent damaging pins, do not twist module from side to side.

5. Carefully pull module (6) off board to release from pins.

NOTE

Modules FL3001 through FL3005 are secured with locknuts and are soldered to printed

circuit board. Steps 6 through 9 are typical for all modules.

6. Disconnect green wire (P3002) (7) from FL3002 (8).

7. Using wrench, remove locknuts (9).

Care must be taken when performing next step to prevent damaging printed circuit

board.

8. Using soldering iron, unsolder pins (10) from printed circuit board.

9. Carefully pull module (11) off board.

2-161