CONNECTOR PLATE REPLACEMENT

TM 11-5820-670-12

3-19.

CONNECTOR PLATE REPLACEMENT.

MATERIALS/PARTS: Connector Kit PN SM-B-620336

PRELIMINARY PROCEDURES: Remove receiver-transmitter.

REMOVAL

NOTE

Do not remove any wires or coaxial cables until new connector plate is in place and ready

to be wired.

Remove four screws (1), washers (2), spacers (3), and locknuts (4).

INSTALLATION

Assemble new connector plate (5) in accordance with assembly instructions in installation

instructions (para 3-4).

Secure assembled connector plate (5) to mounting (6) using four screws (1), washers (2),

spacers (3), and locknuts (4). Ensure that spacers (3) are positioned between connector

plate (5) and mounting (6) and that lug (7) is positioned on screw (1) before locknut (4) is

installed and tightened.

Using a soldering iron, remove one wire at a time from old connector plate and solder it to

new connector plate.

FOLLOW-ON MAINTENANCE: Install receiver-transmitter.

3-31