INSTALLATION OF CONNECTOR PLATE SM-B-620336

TM 11-5820-670-12

INSTALLATION INSTRUCTIONS. (CONT)

3-4.

Crimp and solder two terminal lugs (1) to ends of ground strap braid (2).

NOTE

Ensure that one lug of ground strap is placed on mounting screw before nut is installed

and tightened.

Secure assembled connector plate (3) to mounting (4) using four screws (5), washers (6),

spacers (7), and locknuts (8). Ensure that spacers (7) are positioned between connector

plate (3) and mounting (4) and that ground strap lug (1) is secured in place.

Place mounting (4) with installed connector pIate (3) into aircraft and using applicable aircraft

electronic maintenance manual, solder wiring harness leads and coaxial cable leads to termi-

nals on connector plate (3).

3-4