UNPACKING AND INSPECTION-continued

TM 11-5820-670-12

3 - 3 . UNPACKING AND INSPECTION. (CONT)

TOOLS: Tool Kit, Electronic Equipment TK-101/G

WARNING

Radio set receiver-transmitter is compact and heavy. Be very careful when handling it.

Serious personal injury, as well as damage to equipment, could occur. Observe proper

handling procedures.

NOTE

If unit is packed in a wooden crate, remove wooden crate. When cutting cardboard with

knife, do not allow knife to enter carton. Save all packing material for storage purposes.

Using knife, cut tape (1) on box (2).

Open flaps (3) and fold back.

Remove manuals (4).

Remove fiberboard pads (5).

Lift out radio set component (6) (receiver-transmitter shown).

Inspect for damage sustained during shipment. If there is any, report the damage on SF 364, Report

of Discrepancy.

Check to see whether the equipment has been modified. Equipment which has been modified will have

the MWO number near the nomenclature plate. Also check to see whether all current MWO'S have

been applied. Current MWO'S applicable to equipment are listed in DA Pam 310-1, section V.

3-2