REMOVAL-continued - TM-11-5820-401-34-30504

TM 11-5820-401-34-3/0967-LP-432-3060

A1000 ASSEMBLY MAIN CIRCUIT BOARD VR1001 REPLACEMENT. (CONT)

6-5.

REMOVAL (CONT)

CAUTION

Extreme care must be taken when performing next step to prevent damage to Circuit

Board VR1001.

NOTE

Step 9 is for Circuit Board VR1001 with Voltage Regulator FL1001 which is used on A-

models only. For plain models, proceed to step 10.

9. Using soldering iron, carefully unsolder yellow wire (1) and blue wire (2) from

Circuit Board VR1001 and ground wire (3) from ground lug (4).

10. Carefully push ten color-coded wire plugs (5) out of case (6).

11. Using small flat-tip screwdriver, remove eight screws (7) and ground lug (4).

NOTE

Move ground wire (8) out of way before removing Circuit Board VR1001.

12. Carefully remove Circuit Board VR1001 (9). On A-models only, push Voltage Regulator

FL1001 wiring harness (10) through hole in Circuit Board VR1001.

6-10