|
| TM 11-5820-401-34-3/0967-LP-432-3060
2-19.
A4000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)
INSTALLATlON (CONT)
7. Position shield (1) under board and aline with pins,
8. Secure shield (1) by pushing in four slide clips (2).
CAUTION
Check screws on top of modules for tightness. If loose, tighten.
9. Install blue wire (W201/W401) (3) to J1005.
CAUTION
Care must be taken when performing next step to prevent damage to pins on assembly.
10.
Carefully position P4001 (4) on pins (5) and push into place.
11.
Using screwdriver, tighten two captive screws (6).
12.
Release brace (7) and lower assembly (8) into position.
13.
Using screwdriver, tighten two captive screws (9).
FOLLOW-ON MAINTENANCE: Install bottom cover. (See paragraph 2-7.)
2-40
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |