|
| TM 11-5820-401-34-3/0967-LP-432-3060
A4000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)
2-19.
CAUTION
Extreme care must be taken when performing next step to prevent damaging test points
on printed circuit board. Do not overtighten.
4. Using wrench, carefully tighten locknuts (3).
CAUTION
Before installing modules, make sure pins on assembly are not bent. Straighten any
bent pins.
Extreme care must be taken when performing next step to prevent damage to pins on
assembly.
NOTE
Modules A4100 through A4300 are secured with captive screws. Steps 5 and 6 are
typical for all modules.
Module number location is stamped on board.
5. Carefully position module (5) on pins (6) and push into place.
6. Using screwdriver, tighten captive screws (7).
2-39
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |