 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TM 11-5820-401-34-3/0967-LP-432-3060
A4000 MODULE AND ASSEMBLY REPLACEMENT. (CONT)
2-19.
8. Using screwdriver, loosen two captive screws (6).
CAUTION
Care must be taken when performing next step to prevent damage to pins on assembly.
9.
Carefully lift P4001 (7) off pins (8).
10.
Remove blue wire (W201/W401) (9) from J1005.
11.
Using jeweler's screwdriver, remove C-clip (10) from pin (11).
12.
Using pliers, pull hinge pin (12) out of hinge.
13.
Remove assembly (13).
INSTALLATION
CAUTION
Before installing assembly, make sure pins (8) are not bent. Straighten any bent pins.
1. Position assembly (13) in hinge and insert hinge pin (12).
2. Position brace (14) on pin (11) and install C-clip (10).
NOTE
If modules were not removed from assembly, proceed to step 9 for installation of
assembly.
2-37
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals