|
| TM 11-5820-401-34-3/0967-LP-432-3060
2-10.
MODULES A1100 THROUGH A1500 REPLACEMENT.
MATERIALS/PARTS: Circuit Card Assembly A1100
Circuit Card Assembly A1200
Circuit Card Assembly A1300
Circuit Card Assembly A1400
Circuit Card Assembly A1500
PRELIMINARY PROCEDURE: Remove top cover. (See paragraph 2-7.)
REMOVAL
NOTE
Modules Al 100 through A1500 are housed within the A1000 assembly. To get to the
A1000 assembly, A3000 assembly must first be moved out of the way.
The steps given are typical for removal of all modules.
1.
Place BAND switch control on front panel to BAND
.
2.
Using screwdriver, loosen one captive screw (1) on A3000 assembly (2).
3.
Lower A3000 assembly (2) and secure brace (3).
4.
Disconnect green wire (W202/W402) (4) from clip (5) on A1000 assembly cover (6).
5.
Using screwdriver, loosen four captive screws (7) and remove A1000 assembly cover (6).
2-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |