TB 9-2320-387-35-7
12-22. Route two antenna cables (21) and (22) through right wheelwell/utility area (49) with existing
grommet, retainer, screws, and plain-assembled nuts. (Refer to TM 9-2320-387-24.)
12-23. Remove screw (48), loop clamp (45), and nut (44) from right wheelwell utility area (49).
12-24. Remove four self-tapping screws (46), and loop clamps (45) from tunnel shelf (47).
12-25. Route two antenna cables (21) and (22) along right rear seat/utility area (49).
12-26. Secure two antenna cables (21) and (22) to rear seat/utility area (49) with existing loop clamp (45),
screw (48), and nut (44).
12-27. Route two antenna cables (21) and (22) through four existing loop clamps (45).
12-28. Install two antenna cables (21) and (22) to tunnel shelf (47) with four existing self-tapping screws (46)
and loop clamps (45).
44
46
45
45
21 22
~
~
49
48
47
44. LOCKNUT 271166 QTY. 1
45. CLAMP, LOOP MS21333-68 QTY. 5
48. SCREW MS35206-267 QTY. 1
Figure 5-87.
5-75