Section XI. REAR SINCGARS ANTENNA INSTALLATION

TB 9-2320-387-35-5

Section XI. REAR SINCGARS ANTENNA INSTALLATION

NOTE

This procedure applies to vehicles without existing antennas.

For vehicles with existing antennas, remove all control cables.

(Refer to TM 9-2320-387-24.)

11-1. Using antenna mounting bracket (3) as template, locate, mark, and drill one 1.375-in. diameter

hole (4) in left rear wall (2).

11-2. Locate, mark, and drill three 0.343-in. diameter holes (1) in rear wall (2).

11-3. Remove paint from vicinity of three holes (1) and three matching holes in antenna mounting

bracket (3).

11-4. Apply anti-seize compound to vicinity of three holes (1) and rear of antenna mounting bracket (3).

3. ANTENNA MOUNTING BRACKET A3014546-1 QTY. 1

Figure 5-35.