|
| TB 9-2320-387-35-5
6-16. Secure three 24V fusewire assemblies (24) and one 12V fusewire assembly (7) to B-beam (21) with
four self-tapping screws (29).
NOTE
For models equipped with power stud, perform step 6-17.
Otherwise, proceed to step 6-18.
6-17. Secure 24V terminal board power wire terminal lug (27) to power stud (37) with lockwasher (31)
and existing nut (36).
6-18. Secure 24V terminal board power wire terminal lug (27) to terminal board (35) with lockwasher (31)
and existing nut (36).
6-19. Install decal (34) on B-beam (21).
6-20. If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-387-24.)
6-21. Install batteries. (Refer to TM 9-2320-387-24.)
21
24
~
34
7
29
27
35
27
37
31
36
36
31
29. SELF-TAPPING SCREW 12342499-2 QTY. 4
31. LOCKWASHER MS35338-48 QTY. 1
34. DECAL 12339060 QTY. 1
Figure 5-16.
5-12
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |