Section XI. REAR SINCGARS ANTENNA INSTALLATION
This procedure applies to vehicles without existing antennas. For
vehicles with existing antennas, remove all control cables. (Refer
to TM 9-2320-387-24.)
11-1. Using antenna mounting bracket (3) as template, locate, mark, and drill one 1.375-in. diameter
hole (4) in left rear wall (2).
11-2. Locate, mark, and drill three 0.343-in. diameter holes (1) in rear wall (2).
11-3. Remove paint from vicinity of three holes (1) and three matching holes in antenna mounting
11-4. Apply anti-seize compound to vicinity of three holes (1) and rear of antenna mounting bracket (3).
3. ANTENNA MOUNTING BRACKET A3014546-1 QTY. 1