 |
|||
|
|
|||
|
Page Title:
Section IX. HF 150 WATT RADIO ANTENNA BRACKET AND ANTENNA INSTALLATION |
|
||
| ||||||||||
|
|  TB 9-2320-387-35-4
Section IX. HF 150 WATT RADIO ANTENNA BRACKET AND ANTENNA INSTALLATION
NOTE
Do not tighten screws at this time.
9-1. Attach antenna mounting bracket (5) to rear wall of right rear wheelhouse (3) with three capscrews
(6), six lockwashers (2), three aluminum spacers (4), and nuts (1).
9-2. Temporarily install support bar (7) on antenna mounting bracket (5).
9-3. Using support bar (7) as template, locate and mark two hole locations (8). Remove support bar (7).
9-4. Drill two 0.281-in. diameter holes (8) in right rear wheelhouse (3).
NOTE
Do not tighten bolts at this time.
9-5. Attach support bar (7) to antenna mounting bracket (5) with two capscrews (13), lockwashers (10),
and washers (11).
NOTE
Do not tighten capscrews at this time.
9-6. Attach support bar (7) to right rear wheelhouse (3) with two capscrews (12), washers (11),
spacers (4), lockwashers (10), and nuts (9).
9-7. Tighten top two capscrews (6) securing antenna mounting bracket (5) to right rear wheelhouse (3).
9-8. Tighten two capscrews (13) securing support bar (7) to antenna mounting bracket (5).
9-9. Tighten two capscrews (12) securing support bar (7) to right rear wheelhouse (3).
1
2
3
5
4
2
6
1.
NUT 9418892 QTY. 3
2.
LOCKWASHER MS45904-72 QTY. 6
4.
SPACER 10181-5214-01 QTY. 3
5.
MOUNTING BRACKET, ANTENNA BASE RF292 QTY. 1
6.
CAPSCREW B1821BH031F125N QTY. 3
Figure 5-34.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals