Install integrated rack - TB-9-2320-387-35-40040

TB 9-2320-387-35-4

7-19. Position integrated rack (6) on rack support (1).

7-20. Install integrated rack (6) on rack support (1) using five capscrews (27), lockwashers (28), and

washers (29), and one capscrew (30), lockwasher (28), and washer (29).

27.

CAPSCREW B1821BH025C088N QTY. 5

28.

LOCKWASHER MS35338-44 QTY. 6

29.

WASHER MS27183-10 QTY. 6

30.

CAPSCREW B1821BH025C063N QTY. 1

Figure 5-25.

7-21. Fabricate ground strap (35) from 8-in. length of braided wire and two terminal lugs.

NOTE

Remove paint from vicinity of integrated rack mounting hole

before performing step 7-22. Apply antiseize compound as

required.

7-22. Attach integrated rack (6) to dash panel (34) using two capscrews (31), lockwashers (32),

washers (33), and ground strap (35).

31 32

31 32 33

31.

CAPSCREW B1821BH025C100N QTY. 2

32.

LOCKWASHER MS35338-44 QTY. 2

33.

WASHER 2436161 QTY. 2

35.

GROUND STRAP

BRAIDED WIRE AA59569F30T0375 QTY. A/R

TERMINAL LUG MS20659-141 QTY. 2

Figure 5-26.

5-18