Route power cable - TB-9-2320-387-35-30076

TB 9-2320-387-35-3

NOTE

Loosen right-side tunnel insulation before performing step 17-7.

(Refer to TM 9-2320-387-24.)

17-7. Route power cable (27) under right-side tunnel insulation (28) towards terminal board. (Refer to

17-8. Attach heat shrink tubing (17) and two terminal lugs (15) and (21 to power cable negative lead (20)

and power cable positive lead (18). (Refer to TM 9-2320-387-24 for terminal connector repair.)

17-9. Connect power cable positive lead (18) to 24V terminal board (23) located on cab enclosure

panel (14) with existing nut (16).

17-10. Connect power cable negative lead (20) to ground strap (22) located on cab enclosure panel (14)

with existing nut (16). Secure leads together with tiedown strap (19).

17-11. Secure right-side tunnel insulation. (Refer to TM 9-2320-387-24.)

15.

TERMINAL LUG 7728780 QTY. 1

17.

SHRINK TUBING MS23053/4-302-0 QTY. A/R

19.

TIEDOWN STRAP MS3367-1-0 QTY. A/R

21.

TERMINAL LUG 7728777 QTY. 1

Figure 5-63.

5-48

Change 1