 |
|||
|
|
|||
|
Page Title:
Install forward inboard support leg |
|
||
| ||||||||||
|
|  TB 9-2320-387-35-2
18-6. Install forward inboard support leg (11) on forward inboard position of base weldment (4) with
capscrew (12), two washers (10), and locknut (9) through second hole (14) from bottom of forward
inboard support leg (11). Do not tighten locknut (9) at this time.
18-7. Apply threadlock compound to threads of two capscrews (13).
18-8. Secure bottom of forward inboard support leg (11) with two capscrews (13), washers (10), and
weldment spacers (8). Tighten capscrews (13) to 74 lb-in and locknut (9) to 120 lb-in.
18-9. Install rear inboard support leg (11) on rear inboard position of base weldment (4) with capscrew
(12), two washers (10), weldment spacer (8), and locknut (9) through second hole (14) from bottom
of rear inboard support leg (11). Do not tighten locknut (9) at this time.
18-10. Apply threadlock compound to threads of two capscrews (13).
18-11. Secure bottom of rear inboard support leg (11) with two capscrews (13), washers (10), and weldment
spacers (8). Tighten capscrews (13) to 74 lb-in and locknut (9) to 120 lb-in.
11
4
10
12
10
9
10
9
13
10
8
8
13
10
8
8.
WELDMENT SPACER A3265776 QTY. 5
9.
LOCKNUT MS35649-2254 QTY. 2
10.
WASHER MS15795-810 QTY. 8
11.
INBOARD SUPPORT LEG A3265762-2 QTY. 2
10
12.
CAPSCREW B1821BH025C275N QTY. 2
12
13.
CAPSCREW B1821BH025C175N QTY. 4
14
Figure 5-77.
Change 1
5-58
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals