Remove paint from vicinity of three mounting slots

TB 9-2320-280-35-7

7-6. Remove paint from vicinity of three mounting slots (7) on integrated rack (1).

7-7. Apply anti-seize compound to vicinity of three mounting slots (7) on integrated rack (1) as required.

Figure 5-16.

NOTE

Do not install mounting hardware on top of integrated rack at this

time. Not installing this hardware leaves the integrated rack free

to pivot to assist in routing of cabling. Secure rack only after all

cabling has been routed.

7-8. Mount integrated rack (1) to existing radio rack mount (10) using capscrew (12), washer (11),

lockwasher (9), and nut (8). Repeat for opposite side. Do not tighten screws.

NUT MS35649-2382 QTY. 2

LOCKWASHER MS35338-46 QTY. 2

11.

WASHER 2436163 QTY. 2

12.

CAPSCREW B1821AH038C225N QTY. 2

Figure 5-17.

5-13