|
| TB 9-2320-280-35-6
Section XXIII. DVE DISPLAY CONTROL MODULE (DCM) ROOF MOUNT INSTALLATION
NOTE
DCM mount is installed flush with vehicle roof. Remove roof
insulation on driver's side if necessary. (Refer to
TM 9-2320-280-20.)
Remove driver-side sun visor if installed. (Refer to
TM 9-2320-280-20.)
23-1. Using DCM roof mount as template, locate, mark, and drill six 0.391-in. holes (2) on driver-side
support rail (3) and driver-side outer rail (1).
23-2. Install six rivet nuts (4) in six holes (2).
2
1
~
4
~
3
2
4. RIVET NUT 3221003-14 QTY. 6
Figure 5-68.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |