Route two antenna cables - TB-9-2320-280-35-60056

TB 9-2320-280-35-6

NOTE

It may be necessary to drill four 0.147-in. holes in right wheelwell

utility area before performing step 13-9. (Refer to figure 5-37.)

13-9. Route two antenna cables (6) and (18) along right rear seat/utility area with four self-tapping

screws (21) and loop clamps (22).

13-10. Route two antenna cables (6) and (18) through right wheelwell/utility area with existing grommet,

retainer, screws, and nut and lockwasher assemblies. (Refer to TM 9-2320-280-20.)

21. SELF-TAPPING SCREW 9421073 QTY. 4

22. LOOP CLAMP MS21333-96 QTY. 4

Figure 5-37.