|
| TB 9-2320-280-35-4
Section XIX. PLGR ANTENNA AND CABLES INSTALLATION (WITHOUT BOLT-ON ARMOR)
19-1. Remove two plugs (1) from outer right side windshield frame (3).
NOTE
Drilled holes on inside and outside of windshield frame should be
in alignment with each other to allow routing of PLGR cable
through windshield frame.
19-2. Locate, mark, and drill 0.375-in. diameter hole (2) in outer right side windshield
frame (3).
3
2
1
0.75
3.00
Figure 5-47.
19-3. Locate, mark, and drill 0.375-in. diameter hole (4) in inner right side windshield frame (5).
4
1.25
~
5
5.12
Figure 5-48.
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |