|
| TB 9-2320-280-35-4
Section XIII. EPLRS MOUNT INSTALLATION
13-1. Align MT-6146/VSQ mount (1) with two existing holes (5).
13-2. Using MT-6146/VSQ-1 mount (1) as template, locate, mark, and drill two 0.343-in. diameter
holes (7). Remove paint from vicinity of four mounting holes (5) and (7). Apply antiseize compound
as required.
13-3. Install MT-6146/VSQ-1 mount (1) on multi-net rack (4) with four capscrews (2), eight
lockwashers (3), and four nuts (6).
1
2
~
3
5
4
5
7
7
~
6
3
2. CAPSCREW B1821BH031C125N QTY. 4
3. LOCKWASHER MS45904-72 QTY. 8
6. NUT 9418892 QTY. 4
Figure 5-35.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |