Route antenna cable - TB-9-2320-280-35-30109

TB 9-2320-280-35-3

29-20. Route antenna cable (7) through existing loop clamp (43) on lower windshield frame (42) and

through center access hole (39) of integrated rack (35). Secure antenna cable (7) with existing

self-tapping screw (33).

NOTE

Integrated rack will be secured to dash at this time.

29-21. Secure integrated rack (35) to dash (37) with three capscrews (38), two washers (40),

lockwashers (41) and (36), and ground strap (34). Tighten lower mounting screws on integrated

rack (35). (Refer to chapter 5, section VII.)

36.

LOCKWASHER MS45904-68 QTY. 2

38.

CAPSCREW B1821BH025C100N QTY. 3

40.

WASHER MS27183-10 QTY. 2

41.

LOCKWASHER MS35338-44 QTY. 2

Figure 5-101.

29-22. Route antenna cable (7) from under integrated rack (35) to PLGR bracket (44). Coil excess cable

and store under integrated rack (35).

Figure 5-102.

Change 1

5-79