Route PLGR antenna cable - TB-9-2320-280-35-20110

TB 9-2320-280-35-2

NOTE

Perform steps 29-13 through 29-18 for vehicles with vertical wiper

motor only.

29-13. Route PLGR antenna cable (7) through hole (4) in left side inner windshield frame (5).

29-14. Split one side of grommet (6), place grommet (6) on cable (7), and insert grommet (6) in hole (4) in

left side windshield frame (5).

NOTE

Perform steps 29-15 and 29-16 for vehicles without sun visor kit

installed.

29-15. Locate, mark, and drill 0.390-in. hole (25) in left side windshield frame (5). Install insert (24) in

hole (25).

29-16. Route cable (7) along left side windshield frame (5) and secure with loop clamp (21), capscrew (23),

and lockwasher (22).

NOTE

Perform step 29-17 for vehicles with sun visor kit installed.

Antenna cable is secured with topmost sun visor bracket screw.

29-17. Route cable (7) along left side windshield frame (5) and secure with loop clamp (21), existing

capscrew (23), and lockwasher (22).

1.25

GROMMET MS35489-143 QTY. 1

21.

LOOP CLAMP MS21333-96 QTY. 1

22.

LOCKWASHER MS35338-44 QTY. 1

23.

CAPSCREW B1821BH025C100N QTY. 1

24.

INSERT 12446871-2 QTY. 1

Figure 5-105.

5-80