|
| TB 9-2320-280-35-2
NOTE
Perform steps 29-10 through 29-12 for vehicles with horizontal
wiper motor only.
Ensure all slack has been taken up outside after routing cable to
inside of vehicle.
29-11. Split one side of grommet (6), place grommet (6) on cable (7), and insert grommet (6) in hole (4) in
left side inner windshield frame (5).
29-12. Route cable (7) along left side inner windshield frame (5) and secure with loop clamp (21) and
existing clamps (17), screws (19), washers (18), and lockwashers (20).
6
4
5
~
7
21
18
20
17
19
18
20
17
19
18
19
6. GROMMET MS35489-143 QTY. 1
21. LOOP CLAMP MS21333-96 QTY. 1
Figure 5-104.
5-79
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |