Route two antenna cables - TB-9-2320-280-35-20059

TB 9-2320-280-35-2

NOTE

It may be necessary to drill four 0.147-in. holes in right wheelwell/

utility area before performing step 13-9. (Refer to figure 5-40.)

13-9. Route two antenna cables (6) and (17) along right rear seat/utility area with four self-tapping screws

(20) and loop clamps (21).

13-10. Route two antenna cables (6) and (17) through right wheelwell/utility area with existing grommet,

retainer, screws, and plain-assembled nuts. (Refer to TM 9-2320-280-20.)

20. SELF-TAPPING SCREW 9421073 QTY. 4

21. LOOP CLAMP MS21333-69 QTY. 4

Figure 5-40.

5-29