|
| TB 9-2320-280-35-13
Section XX. EPLRS AND SINCGARS ANTENNA INSTALLATION (TWO-MAN VEHICLES)
NOTE
Perform following procedures for a two-man vehicle configuration only.
20-1. Enlarge four holes (2) to 0.343-in. diameter, and remove paint from vicinity of four mounting
holes (2) on antenna base bracket (1).
2
1
Figure 5-71.
NOTE
Perform steps 20-2 and 20-3 on left and right side of antenna
overcab mount.
20-2. Using antenna base bracket (1) as template, align access holes of antenna base bracket (1) and
antenna overcab mount (5). Mark and drill four 0.343-in. diameter holes (2) in antenna overcab
mount (5).
20-3. Remove paint from vicinity of four mounting holes (2) on antenna overcab mount (5). Apply
anti-seize compound as required.
screws (3), sixteen lockwashers (4), and eight nuts (6).
1
1
3
4
2
1.
ANTENNA BASE BRACKET A3050655-1 QTY. 2
5
3.
SCREW B1821BH031F100N QTY. 8
4.
LOCKWASHER MS45904-72 QTY. 16
4
5.
ANTENNA OVERCAB MOUNT A3265061 QTY. 1
6.
NUT 9418892 QTY. 8
6
Figure 5-72.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |