|
| TB 9-2320-280-35-13
NOTE
Do not install cab enclosure panel.
Use figures 5-2 and 5-3 to identify cab enclosure panel that is
being modified.
3-3. Locate, mark, and drill three 0.156-in. diameter holes marked A in cab enclosure panel (3) as shown
in figures 5-2 or 5-3.
3-4. Locate, mark, and drill two 0.156-in. diameter holes marked C in cab enclosure panel (3) as shown
in figures 5-2 or 5-3.
.50
16
75
9.8
3.17
0
3.0
1.33
0
3.0
A
3
A
A
11.725
C
C
B
2.25
B
3.00
3.00
5-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |