AN/PEQ-2 Infrared Target Illuminator/Aiming Light (ITPAIL)

AN/PEQ-2 Infrared Target Illuminator/Aiming Light (ITPAIL)

SYSTEM PARAMETERS

SYSTEM DESCRIPTION

The AN/PEQ-2 is a target illuminator/aiming light that can be gun-mounted or hand-held.

Wavelength: 820 - 860 nm

HAZARD CONTROLS (to reduce or eliminate risk)

SYSTEM HAZARDS

Laser Classification ............

This system contains a Class 3b laser and requires an established laser safety program to

ensure its safe use. Develop a written Local Standing Operating Procedure (SOP) IAW

provided guidance in this TB.

Hazard distance .................

In the dual low mode, do not permit personnel to view the laser from within the beam at

distances less than 50 m for unaided viewing or 410 m when viewing the laser through

magnifying optical instruments. In the dual high mode, do not permit personnel to view

the laser from within the beam at distances less than 91 m for unaided viewing or 640 m

when viewing the laser through magnifying optical instruments. In the aim high mode, do

not permit personnel to view the laser from within the beam at distances less than 70 m for

unaided viewing or 500 m when viewing the laser through magnifying optical instruments.

In the illuminator high mode, do not permit personnel to view the laser from within the

beam at distances less than 50 m for unaided viewing or 410 m when viewing the laser

through magnifying optical instruments.

Ocular injury ....................

Avoid direct exposure to beam. Use protective eyewear that filter at 800-860 nm with

minimum OD of 1.8.

Outdoor range operations .....

Eliminate all specular surfaces (man made and natural) capable of producing potentially

hazardous reflections. Control unauthorized personnel access to controlled area. Use a 10

mrad buffer zone when training with the laser. Use only on an approved laser range or

training area. Appoint a qualified Laser Range Safety Officer.

Other...............................

Consult the equipment Technical Manual for other operator and/or maintenance hazards.

REFERENCES: USA CHPPM Study: 25-42-4745-96

Equipment - 78