 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TB 11-5820-890-12
4-16. FULL FUNCTION ANCD.
The full function ANCD contains the complete keypad (35 keys) and the unit may have application programs
installed.
4-17. CLEANING.
a.
Exterior Surface.
CAUTION
Do not use steel wool on your ANCD. The metal particles could cause damage.
(1)
Remove dust and loose dirt with a soft cloth.
(2)
Remove grease, oil, fungus, and ground-in dirt with a dampened cloth.
b.
Connectors. Clean all connectors with a dampened cloth. Wipe pin contacts with the same cloth. Clean
connector contacts the same way using a small brush or toothpick.
4-18. PARTS REPLACEMENT.
This section describes the unit-level parts replacement procedures for the ANCD. The table below lists the tools
needed to replace the parts described in the following paragraphs. All three tools can be found in the Tool KH,
Electronic Equipment, TK-105/G.
NO. NEEDED
TOOL DESCRIPTION
1
1/8 Flat Blade Screwdriver
1
#1 Phillips Screwdriver
1
1/16 Hex Key
4-19. BATTERY.
The ANCD has three battery options; three Lithium batteries, a 9 volt Lithium or Alkaline battery, or one NICAD
battery. Battery replacement is similar in all cases. See Paragraph 3-1 la for battery replacement procedures.
4-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals