Figure 2-9. ANCD SUPERVISOR Menu

TB 11-5820-890-12

Appl

Date

Time Setup

Util

Bit

Figure 2-9. ANCD SUPERVISOR Menu

It is important that users of the SUPERVISOR program understand what the various sub-functions

represent. Some are essential; others can take the ANCD out of field operation. Thus, each is explained

below by menu item.

"APPL" - Selecting this option takes the user to a screen showing SOI, RDS, and RADIO. By entering RDS

(RBECS DTD Software), the screen changes back to the normal main menu of RADIO, SOI, and

SUPERVISOR. This is the primary method of exiting the SUPERVISOR program.

"DATE" - Date is presented as MM-DD-YY. This option allows the user to view and change the date

contained in the ANCD's memory. The screen reads "Date is Tue 04-13-1993/New mm-dd-yy:" Although

screen shows a four-digit year, only the last two digits need to be entered when entering a new date.

'"TIME" - Time is presented as HH:MM:SS and is frozen at the moment of pressing ENTR. The time

screen reads 'Time is 11:46:34/New hh:mm:ss:" Exact time, for example from a GPS source, can be

entered into the ANCD by entering the minute ahead, 00 for seconds, and pressing ENTR when the source

time reaches that exact point.

"SETUP" - This supervisor item provides for a menu-driven configuration and displays allowable user

options, as follows:

"Home_Addr " - Displays a screen reading Display Address/Change Address". This feature enables

the user to enter or change the address of the unit which is responsible for the ANCD.

"Serial #" - Displays a screen reading "S/N: 012345/New S/N:" User may enter or change the serial

number of the device.

"Batt" - Displays a screen reading 'Display Batt Date Time/Change Batt Date/Time". By pressing

ENTR for display, the user is shown the date and time at which the battery was last changed.

CAUTION: By pressing ENTR for change, current date and time are automatically entered as

date/time of battery change.

"More" - Provides a menu showing the following supervisory features:

"Auto_Off" - Allows user to check or change the time at which the ANCD will automatically

shut down. Time can be varied from 0-60 minutes. Screen reads "Auto-Shutoff Time

30:00/New (mm:ss):"

"Def_CIK" - (meaning define CIK) - Provides a screen reading "Display Default CIK/Change

Default CIK:" Choices are 'User" and Supervisor".

2-17