|
| TB 11-5820-890-10-11
6. Switch Settings and Initialization.
The following tables provide the necessary switch settings and
communication parameters for interoperability. Initialize the MCS for communication as shown In Table 6-2 Verify
the switch settings for both the radio and the MCS; then establish communication on the net.
For a SINCGARS/VRC-12 net, select channel code 13.
In a hostile or noisy environment, and long communications distances, a data rate slower than 16
kbps is required. Choose 4800, 2400, or 1200 bps as conditions permit. This Is accomplished by
modifying channel code 13 (KY-57 SINCGARS NRZ 16k) as shown in Table 6-2 and saving
Initialization as a new channel code 19 called 'SINCGARS LOW SPEED DATA .
Place radio to standby when doing a system initialization or channel reconfiguration. Turn
function switch to SQ ON after Initialization is complete.
You must clear the COMSEC alarm with a double PTT before proceeding.
SWITCH
ICOM RADIO
NON-ICOM RADIO
CH 13
CH 19
CH 13
CH 19
FUNCTION
SQ ON
SQ ON
SQ ON
SQ ON
MODE
SC OR FH
SC OR FH
SC OR FH
SC OR FH
DATA
16K
1.2K
16K
1.2K
COMSEC
CT
CT
TSEC/ON
TSEC/ON
KY-57CT
KY-57CT
*
OFF
OFF
N/A
N/A
Table 6-1. SINCGARS Radio Set
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |