Packing Packing shall be level A

Packaging Development Packaging shall be

by sealing with tape not less than 2 in

developed in accordance with method IIb for radio

conforming to PPP-T-76 The tape sha

transmitter T-47 ART-13 and method III for radio

tered over the seams and joints and extend over

transmitter T-595 AR using kinds and types of

all corners and edges of the box mimunum of

materials which. when applied. will afford ade-

inches onto the adjacent box panels Tape sha

quate protection against corrosion. deterioration,

be applied over the lengthwise seams of the outer

and damage during worldwide shipment, handling.

flaps closing the openings of the box and over the

and storage The outer container of a method IIb

manufacturer's joint before the tape is applied to

or method III package shall conform to the require-

the edge scams of the box The tape applied to the

ments of PPP-B-636, type CF. class weather-resis-

manufacturer's joint shall fully cover only the joint

tant Closure shall be in accordance with the ap-

and not extend over the corners of the box onto

pendix of the box specification

the adjacent panels

C-2 Packing Packing shall be level A

c Closure shall bc in accordance with the ap-

plicable container specifications of appendix there-

The radio transmitters packaged as specified

in paragraph 1. shall be packed in containers se-

lected from table 1. based on the most economical

strapping. conforming to QQ-S-781.

Metal

container required to provide minimum, adequate

type 1. class B shall be applied to wood and wood-

protection for the packaged items for this packing

cleated shipping containers in accordance with the

level of protection

requirements of the applicable box specification

or appendix thereto Fiberboard shipping contain-

b When the containers being placed directly

ers shall bc reinforced by pressure-sensitive fil-

into the shipping container are not waterproofed,

ament tape banding. or nonmetallic strapping con-

waterproofing shall be effected by use of an in-

forming to PPP-T-97, type IV, and PPP-S-760, type

d i c i d u a l w r a p o r a caseliner conforming to MIL-

II, rcspcctively, selection of the material and ap-

L-10547. grade B, and appendix thereto, before

plication shall he in accordance with the appendix

p a c k i n g D u n n a g e not inclosed within the water-

of the applicable box specification

proof wrap or caseliner shall consist of materials

treated to resist water Wraps or caseliners may

C-3 Inspection. Inspection of military packaging

be omitted from fiberboard boxes if all seams, cor-

shall be in accordance w1t.h MIL-P-116

ers, and manufacturer's joints are waterproofed

Table

Container

Requirements