|
| MWO 11-5821-260-30-1
Table 1. Radio Set Electrical Test -- Continued
Equipment under test
Test equipment
Step
Test procedure
Performance standard
control settings
control settings
No.
A. Adjust the am. gen-
A. None.
Same as step 1.
9
Same as step 1.
erator for the fol-
lowing output
applied to main-
tenance kit connec-
tor J12:
116.000 MHz
Amplitude:
100 Vrms
Modulation:
1 kHz, 90%
B. Adjust the AUDIO
B. 2.75 Vrms.
control until the
amplitude of the
main receiver output
signal at main-
tenance kit connec-
tor J18 is 2.75
Vrms.
c . Remove the 1 kHz of
c. 10 dB down (min). (Difference
modulation (am. gen-
between modulated and unmodu-
erator to cw mode).
lated modes.)
18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |