Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: REPLACEMENT OF POWER SUPPLY ADAPTER CHASSIS ASSEMBLY. Continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 



TM 11-5820-890-30-5 14-40.  REPLACEMENT  OF  POWER  SUPPLY  ADAPTER  CHASSIS  ASSEMBLY.  Continued ITEM ACTION REMARKS INSTALLATION ba. bb. bc. bd. be. bf. bg. bh. Spanner  nut bi. bj. Power  supply  adapter chassis  assembly  (10), 25  lockwashers,  and two  spring  pins Wiring  harness  with rear  access  cover,  J2 connector,   S1   rotary switch,  and  CR1,  CR3, and CR4 diodes Screw,  flat  washer  (5), and  two  terminal lugs  (4) Two  screws,  flat  washers (8),  and  four  terminal lugs  (7) Rubber washer Hex   nut   and Iockwasher O-ring and  Iockwasher CR1  diode  (9),  flat washer,  and  Iockwasher Three  screws,  flat washers,  and Iockwashers  (1) Obtain  replacement  power  supply  adapter chassis  assembly,  25  Iockwashers,  and two  spring  pins. Carefully  position  retained  wiring  harness with  rear  access  cover,  J2  connector, S1  rotary  switch,  and  CR1,  CR3,  and CR4  diodes  on  replacement  power  supply adapter  chassis  assembly.  Route  the  wiring harness  as  shown  in  figure  14-11. Use  cross  tip  screwdriver.  Install  and tighten  screw,  flat  washer,  and  two terminal  lugs  securing  the  wiring  harness to  E4  on  the  chassis. Use  cross  tip  screwdriver.  Install  and tighten  two  screws,  flat  washers,  and  four terminal  lugs  securing  the  wiring  harness to  E5  on  the  chassis. Apply  silicone  compound  to  rubber washer  on  retained  S1  rotary  switch. Use  adjustable  wrench.  Install  and  hand tighten  hex  nut  and  replacement  Iockwasher securing  the  S1  rotary  switch  on  the chassis.  Use  torque  wrench.  Torque to  13  in-lb. Apply  silicone  compound  to  o-ring on  retained  J2  connector  (3). Use  1  5/16  inch  spanner  wrench.  Install and  tighten  spanner  nut  and  replacement Iockwasher  securing  J2  connector  (3)  on the  chassis.  Use  torque  wrench  and socket  wrench  spanner  attachment. Torque  to  90  in-lb. Use  adjustable  wrench.  Install  and  tighten retained  CR1  diode,  flat  washer,  and replacement  Iockwasher  on  the  chassis. Use  cross  tip  screwdriver.  Install  and  tighten three  retained  screws,  flat  washers,  and replacement  Iockwashers  securing  retained angle  bracket  (2)  with  the  CR3  and  CR4 diodes  on  the  chassis. 14-71


Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business