|
| |
TM 11-5820-890-30-5
14-20. REPLACEMENT OF SEAL SCREW.
Tools:
Flat tip screwdriver
Torque screwdriver
Flat tip bit
ITEM
ACTION
REMARKS
REMOVAL
a.
Power supply adapter
Set on work surface with rear toward
you. See figure 14-4.
b.
Seal screw (1)
Use flat tip screwdriver. Remove damaged
seal screw (1) from middle left side
of rear access cover (2) and discard.
INSTALLATION
c.
Seal screw (1)
Obtain replacement seal screw (1).
d. Rear access cover
Use flat tip screwdriver. Install and
(2) and seal screw (1)
hand tighten replacement seal screw
on rear access cover (2). Use torque
screwdriver. Torque to 15 in-lb.
Figure 14-4.
Power Supply Adapter (Rear View) With Rear Access Cover.
14-32
|
