|
| |
14-19. REPLACEMENT
Tools:
Pocket knife
Expendable Supplies:
Alcohol
Cheesecloth
OF
TM 11-5820-890-30-5
IDENTIFICATION PLATE.
Trichloroethane 1,1,1
Skin/eye protection items
ITEM
ACTION
REMARKS
REMOVAL
a.
Power supply adapter
Set on work surface with left side
toward you. See figure 14-3.
b.
Identification plate (3)
Using a pocket knife, remove damaged
identification plate (3) from power supply
adapter case assembly (4), and discard.
Isopropyl alcohol is flammable and toxic to skin, eyes, and respiratory tract.
Avoid skin and eye contact. Good general ventilation is normally adequate. Keep
away from open flames or other sources of ignition.
c.
Power supply adapter
Using alcohol and cheesecloth, remove
case assembly (4)
all adhesive residue left from damaged
identification plate on power supply
adapter case assembly (4).
INSTALLATION
d.
Identification plate (3)
Obtain replacement identification plate (3).
Trichloroethane 1,1,1 is flammable and toxic to skin, eyes, and respiratory tract.
Skin/eye protection is required. Avoid repeated prolonged contact. Good
general ventilation is normally adequate. Keep away from open flames or other
sources of ignition.
e.
Trichloroethane 1,1,1
Apply trichloroethane to back of
identification plate to activate adhesive.
f.
Power supply adapter
Install identification plate (3) on power
case assembly (4)
supply adapter case assembly (4).
14-31
|
