|
| |
TM 11-5820-890-30-5
14-18. REPLACEMENT OF POWER SUPPLY ADAPTER CHASSIS (8A2).
Tools:
Flat tip screwdriver
Torque screwdriver
Flat tip bit
References:
Paragraph 14-17 for removal and installation of the heat sink assembly (8A1).
ITEM
ACTION
REMARKS
REMOVAL
a.
Heat sink assembly (2)
Use flat tip screwdriver. Remove and
Refer to paragraph 14-17
b.
Power supply
chassis (1)
INSTALLATION
c.
Power supply
chassis (1)
retain heat sink assembly (2) from
for heat sink removal.
defective power supply adapter chassis
(1). See figure 14-3.
adapter
Turn in defective chassis to supply for
disposition.
adapter
Obtain replacement power supply adapter
chassis.
d. Heat sink
Use flat tip screwdriver. Install retained
assembly (2)
heat sink assembly (2) on replacement
power supply adapter chassis (1). Use
torque screwdriver. Torque to 9 in-lb.
Refer to paragraph 14-17
for heat sink installation.
Figure 14-3.
Power Supply Adapter (Left Side View) With Heat Sink Assembly.
14-30
|
