|
| |
TM 11-5820-890-30-5
8-13. REPLACEMENT OF LATCH/STRIKE ASSEMBLY.
Tools:
Cross tip screwdriver
ITEM
ACTION
REMARKS
REMOVAL
a.
b.
c.
d.
Two screws (11), flat
washers (13), and lock-
washers (12)
Latch assembly (32)
Two screws (11), flat
washers (13), and lock-
washers (12)
Strike (14) or (23)
INSTALLATION
e.
f.
g.
h.
Strike (14) or (23)
Two screws (11), flat
washers (13), and lock-
washers (12)
Latch assembly (32)
Two screws (11), flat
washers (13), and lock-
washers (12)
Use cross tip screwdriver. Remove and
retain two screws, flat washers, and lock-
washers securing latch (32) to battery box
cover (1).
Remove and discard.
Use cross tip screwdriver. Remove and
retain two screws, flat washers, and lock-
washers securing strike (14) or (23) to
battery box case (15).
Remove and discard.
Position replacement strike to battery box
case (15).
Use cross tip screwdriver. Install two re-
tained screws, flat washers, and lock-
washers securing strike (14) or (23) to
battery box case (15)
Position replacement latch to battery box
cover (1).
Use cross tip screwdriver. Install two re-
tained screws, flat washers, and lock-
washers securing latch (32) to battery
box cover.
8-14. REPLACEMENT OF CATCH ASSEMBLY.
Tools:
Cross tip screwdriver
NOTE
Do not over tighten
screws.
NOTE
Do not over tighten
screws.
ITEM
ACTION
REMARKS
REMOVAL
a. Two screws (11), flat
Use cross tip screwdriver. Remove and
washers (13), and lock-
retain two screws, flat washers, and lock-
washers (12)
washers securing defective catch assem-
bly (18) to battery box case (15).
b. Catch assembly (18)
Remove and discard.
8-10
|
