MAINTENANCE

4.4 MAINTENANCE.

4.4.1 GENERAL.

The following paragraphs contain general maintenance information

and brief instructions for replacing the fuse and the strobotron lamp.

4.4.2 CLEANING OF REFLECTOR AND COVER.

Since the inside of the reflector is well protected by the cover

and by the seal at the swivel arm, it is improbable that impurities in

the air will collect on the reflective surface. However, if it should

become necessary to clean the inside of the reflector, first pull the

reflector from the swivel assembly. Remove the cover by pushing on

the edge of the cover at each of the three fingers that clamp over the

reflector housing. Use a soft, lint-free cloth to clean the reflector

surface and cover. If necessary, moisten the cloth with water. Do not

use solvents of any kind, as they may mar the surface.