Special Information - TM-9-4931-526-34P0006

TM 9-4931-526-34P

PART NUMBER INDEX.Part numbers in this index are listed by part number in ascending alphanumeric

sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group

in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).

(1) FSCM column. The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code used to

identify the manufacturer, distributor, or Government agency, etc., that supplies the

item.

(2) PART NUMBER column.Indicates the primary number used by the manufacturer

(individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means

of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.

(3) STOCK NUMBER column.This column lists the NSN for the associated part number and

manufacturer identified in the PART NUMBER and FSCM columns to the left. The part number line entry (with NSN,

when available) identifies the first figure/item number appearance for which the part number is applicable. The part

number is not listed for additional figure/item number appearances identified by that part number.

FIG. column. This column lists the number of the figure where the item is located in Section II.

(4)

(5) ITEM column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

Special Information

Repair parts for components of standards sets which can be identified as existing in the supply system will be

requisitioned through normal supply channels from the appropriate supply commodity manager.

Repair parts for components of standards sets which cannot be identified as to proper supply source will be

requisitioned from USAMICOM, using routing identifier B64 and furnishing, as a minimum, the following as exception

data.

(1)

Component stock number of the individual end item to be repaired.

(2)

Component manufacturer's equipment model number and serial number.

(3)

The equipment manufacturer's stock number as listed in the appropriate manual for the desired repair

part.

(4) The repair part reference designation, circu it reference, circuit symbol schematic designation, or

reference number as listed in the manufacturer's manual.

(5)

The technical specification of the repair part as contained in the appropriate manufacturer's manual.

(6) The title and date of the manufacturer's manual from which the information in a and b(3), (4), and (5)

above was taken.

For requisitioning miscellaneous consumable maintenance supplies or expendable supplies, use CTA 50-

970.