Special Information - TM-9-4931-514-34P0006

TM 9-4931-514-34P

h. Quantity Incorporated in Unit. Indicates the

requisitioned for plug-in boards

quantity of the item used in the breakout shown on the

identified in the plug-in board

illustration figure, which is prepared for a functional

exchange program, except by the

group, subfunctional group, or an assembly. A "V"

depot designated to perform the

appearing in this column in lieu of quantity indicates that

repair.

Repair of calibration set

no specific quantity is applicable (e.g., shims, spacers,

components, with plug-in board

etc).

assemblies

subassemblies

designated as program exchange

4. Special Information

replacements with a recoverability

code of L, will be accomplished by

a. Repair parts for components of standards sets

replacing the plug-in board.

which can be identified as existing in the supply system

will be requisitioned through normal supply channels

c. The plug-in board exchange program functions

from the appropriate supply commodity manager.

as follows:

b. Repair parts for components of standards sets

(1) Requisitioning instructions for initial issue

which cannot be identified as to proper supply source will

plug-in boards will be provided since new instrument

be requisitioned from USAMIRCOM, using routing

boards are included in the program.

identifier B64 and furnishing as a minimum, the following

as exception data.

(2) As a plug-in board covered by the program

fails, a replacement will be requisitioned. Requisitions

(1) Component stock number of the individual

will be submitted to Commander, US Army Missile

end item to be repaired.

Readiness Command, B64, Redstone Arsenal, AL

35809.

(2) Component

manufacturer's equipment

model number and serial number.

(3) Simultaneously with c(2) above, the

defective board being replaced will be shipped by

(3) The equipment manufacturer's stock

certified mail, return receipt requested, to the following

number as listed in the appropriate manual for the

address:

desired repair part.

Transportation Officer

(4) The repair part reference designation,

Anniston Army Depot

circuit reference, circuit symbol schematic designation,

M/F Field Service Stock

or reference number as listed in the manufacturer's

Anniston, AL 36201

manual.

When requisitioning a replacement board, the turn-in

(5) The technical specification of the repair

document number of the replaced board shall be cited on

part as contained in the appropriate manufacturer's

the requisition.

manual.

5. How to Locate Repair Parts

(6) The title and date of the manufacturer's

manual from which the information in paragraphs a, (3),

a. When NSN or reference number is unknown:

(4), and (5) above was taken.

(1) First.

Using the table of contents,

NOTE

determine the assembly (functional group) within which

the repair part belongs.

Repair

parts

should

not