3-8 INSPECT. Check the equipment for completeness against
Appendixes B and C. Additional inspection instructions for each
item are given in later sections of this chapter.
3-9 TEST. Perform all the individual item tests, specified in
later sections of this chapter. Connect the set for operation at
that time to verify that the components work properly together.
Be sure to test as many configurations, bands, modes, and
functions of the equipment as time and available signals allow.
3-10 HANDLING AFTER TESTS. Battery handling instructions
are given after the tests in section XI of this chapter. Never leave
weak or discharged batteries in the equipment as they are likely
to leak. Be sure fresh batteries are available for the equipment
for the next use.
3-11 REFINISHING. Inspect the finish of each item of the set
for poor finish. If touch-up or refinishing is required, refer the
equipment to organizational maintenance.